FAQ | Links | Banners

View Cart
Back To Tutorials Overview

Fabric Toilet Paper Holder Tutorial

You'll Need:


Fabric Toilet Paper Holder 1 Black Dot

I like to be tidy and organized, which (unfortunately) doesn't show too much - but sometimes I do something to keep our things more tidy. Like this toilet paper holder. Too long have we had toilet paper rolls lying wherever there was room. But no more! With a toilet paper holder that decorates, everything will be keps tidy (concerning TP that is). Hopefully I'll get some other ideas as to how to organize and tidy up all my other stuff. Well - here's a start. ;P

Back to the top

Fabric Toilet Paper Holder 2

Here's a picture of what I used. I've used taffeta fabric for my toilet paper holder. It's nice and shiny, and doesn't catch too much dust. :)

Back to the top

Fabric Toilet Paper Holder 3

Now start by sewing the two pieces of fabric together by one of the short ends (if you've cut two), so you get one long one, measuring 166 cm x 10 cm. Seam allowance is 1 cm.

Cut the seam allowance to approximately 4-5 millimeters and zigzag the seam allowance.

Back to the top

Fabric Toilet Paper Holder 4

Fold and iron your bias tape. This way it'll be easier to sew on.

Back to the top

Fabric Toilet Paper Holder 5

Sew the bias tape all around the fabric - don't start at a corner, but somewhere on the long side.

The corners are the most tricky. When you come near a corner, set the needle down, and fold the corner and pin it. That way you can sew some nice corners.

Back to the top

Fabric Toilet Paper Holder 6

Now fold your future toilet paper holder in half, like shown on the picture. Then make some marks, where the pockets should divide. Start measuringfrom the bottom (the folded end), and measure 19 cm up. mark and make a line. Go up 19 cm further, mark and make a line. You'll have 4 pockets and 6,5 cm left at the top.

Back to the top

Fabric Toilet Paper Holder 7

Pin and sew where you've drawn the lines.

Back to the top

Fabric Toilet Paper Holder 8

Make a strap with your bias tape folded and sewn. 12 cm should do it.

Back to the top

Fabric Toilet Paper Holder 9

Pin your strap between the fabric pieces at the top of you toilet paper holder, and sew. Just sew the entire length of the top, so the fabric pieces are sewn together as well.

Back to the top

Fabric Toilet Paper Holder 10

Cut you pretty ribbon into 15 cm bits. The width of the tp holder plus some more, so you can fold the ends back.

Back to the top

Fabric Toilet Paper Holder 11

Pin the ribbon on, where you've already sewn and make sure the ends fold neatly behind the tiolet paper holder, so that when you're sewing the fron, the ends will be sewn too.

Back to the top

Fabric Toilet Paper Holder 12

Sew on each side of the ribbon (or in the middle of it, depending on the ribbon).

Back to the top

Fabric Toilet Paper Holder 13

All you need to do now is to decorate it. I'm sewing on little bows made of thin sateen ribbon. It's not much, but I think it's cute.

Back to the top

Fabric Toilet Paper Holder 14

And you're DONE! :)

I hope you enjoyed the tutorial. Don't forget to leave feedback, if you have any. ;P

Back to the top


Parnuuna

Divider

Comments

Maria - Rating 5

Sun 6:27 18/December-11

"Thank you! I was looking for this home project for myself while on holiday and came across your tutorial which is perfect.
cheers
Maria"


parnuuna - Rating 5

Fri 15:17 11/November-11

"Thank you, Shirley :)"


Shirley Phillips - Rating 5

Thu 23:15 10/November-11

"Perfect
"


parnuuna - Rating 5

Sun 16:18 25/September-11

"Yay - I'm glad you can use it. "


Suzanne - Rating 4

Sat 12:55 24/September-11

"have been looking for exactly this pattern to make a toilet roll holder. Very happy I stumbled across this page."


BeMyGoth.com - Rating 5

Sun 15:10 19/September-10

"Use our comment system to give us feedback on the tutorials - questions, oppinions, suggestions, etc are all welcome. So, please - feel free to post a lot of comments :D Kind regards Bjarke & Parnuuna"


Page 1 of 1

Your Name:

Email:

Rating:

Write the name of the color you see in the box above:

Divider