FAQ | Links | Banners

View Cart
Back To Tutorials Overview

Bleeding Heart Neck Tie Tutorial

You'll Need:


Bleeding Heart Neck Tie Tutorial 1 Black Dot

Who ever said that neck ties had to be boring and only for men. ;) Here's a fancy neck tie, you can use with your best shirt. You don't even have to know how to tie a tie. :) It'll be really nice with a shirt with a big collar. I'm going to have to make a collared shirt, since I haven't got any yet. And I played around with the front picture, isn't it pretty. :D

Back to the top

Bleeding Heart Neck Tie Tutorial 2

Here's a picture of what you need. ..or rather, what I've used. :D

Back to the top

Bleeding Heart Neck Tie Tutorial 3

Start out by taking your piece of fabric for the main tie. Let the wrong side face up, and draw a line on the bias (diagonally). make 3 marks. The first a bit from the corner, the next, 6 cm up the line, and the last 42 cm up the line.

Back to the top

Bleeding Heart Neck Tie Tutorial 4

By the 6 cm mark, draw a line across, 8 cm to both sides, make marks where they end.

Back to the top

Bleeding Heart Neck Tie Tutorial 5

By the 42 cm mark, draw a line across, 4 cm to both sides, and make marks where they end as well.(I made a mistake, hence the 4 marks - just don't make any notice of it.)

Back to the top

Bleeding Heart Neck Tie Tutorial 6

Combine the marks by drawing lines. It should look like on the picture. Cut out the piece. :)

Using the tie piece as a pattern make the tip lining. It should go 5 cm up the tie.

Back to the top

Bleeding Heart Neck Tie Tutorial 7

Now fold up the tip on the tie and the lining as well. Iron. Then fold the sides up as well, and iron. It should look like on the picture. Crisp and clean. :D

Back to the top

Bleeding Heart Neck Tie Tutorial 8

Pin the lining onto the main tie, wrong side against wrong side. The lining should be a bit shorter, or further up than the main tie, so it won't show on the front.

Back to the top

Bleeding Heart Neck Tie Tutorial 9

Ready your needle and thread! And SEW! :P Sew some stitches to hold the pieces together as shown on the picture.

Back to the top

Bleeding Heart Neck Tie Tutorial 10

Pin the long side of the tide, right side against right side, and sew with 1 cm seam allowance.

Back to the top

Bleeding Heart Neck Tie Tutorial 11

Turn the tie inside out and iron. The seam should be at the mid back.

Back to the top

Bleeding Heart Neck Tie Tutorial 12

Tuck in the top, 1 cm, and fold it down on the backside of the tie - pin it and sew, and you have a drawstring for your ribbon. Now the tie part is done.

Back to the top

Bleeding Heart Neck Tie Tutorial 13

Make a rose of your choice. I've made the pretty ribbon rose, that we have a video tutorial on, because it's really pretty. :D I've taken a long piece of fabric, made a bow without knotting it and used behind the rose as "leaves". Everything sewn together by hand.

Back to the top

Bleeding Heart Neck Tie Tutorial 14

Sew the rose onto the the top of the tie by hand. Use a pen or pencil to hold out the drawstring so you don't sew it together.

Back to the top

Bleeding Heart Neck Tie Tutorial 15

Add the ribbon to tie around the neck, and your done! Tadaa! I think they're really pretty, and as I said before, I'll have to make a collared shirt for these. :D

Back to the top


Hope you enjoyed the tutorial. :) Don't forget to leave feedback, yay!

Parnuuna

Divider

Comments

BeMyGoth.com - Rating 5

Sun 15:10 19/September-10

"Use our comment system to give us feedback on the tutorials - questions, oppinions, suggestions, etc are all welcome. So, please - feel free to post a lot of comments :D Kind regards Bjarke & Parnuuna"


Page 1 of 1

Your Name:

Email:

Rating:

Write the name of the color you see in the box above:

Divider